膜科学与技术

陶瓷膜表面粗糙度对含油废水过滤性能的影响

作者：张兵兵，仲兆祥，邢卫红

单位：南京工业大学化学化工学院，材料化学工程国家重点实验室

关键词：陶瓷膜；表面形貌；植物油；废水

出版年,卷(期):页码： 2011,31(4):42-47

摘要：

膜表面粗糙度是影响膜过滤性能的一个重要因素。本文采用表面粗糙度仪、扫描电子显微镜（SEM）和三维非接触表面形貌仪（WLI）表征膜表面形貌，并考察了陶瓷膜表面粗糙度对过滤含油废水性能的影响。结果显示，具有不同表面粗糙度的相同孔径陶瓷膜，其纯水通量基本相同；粗糙度越大的膜，过滤含油废水的膜通量衰减越快，稳定通量也越低；陶瓷膜表面粗糙度对油截留率基本没有影响；废水中油滴粒径的变化对粗糙度大的膜的稳定通量影响显著，表明光滑膜更适合于处理含油废水。

Membrane surface roughness plays an important role in the permeability of membranes. In this study, the information of surface morphology was provided by surface roughness tester, Scanning Electron Microscopy (SEM) and White Light Interferometer (WLI), and the effect of surface roughness of ceramic membrane on the performance of filtrating oily wastewater was investigated. The ceramic membranes with the same pore size and different surface roughness had the same pure water flux. The results of filtrating oily wastewater indicated that the rougher membranes had larger flux decline and lower steady flux than that of smoother ones. With the change of droplet size in the wastewater, the roughest membrane had the largest change of the steady flux, but the smoothest membrane hardly increased. Surface roughness had little effect on oil rejection. This study indicated that smoother membrane was suitable for treating oily wastewater.

张兵兵(1983－），女，河南省宝丰县人，硕士研究生，研究方向为陶瓷膜表面粗糙度对分离性能的影响.* 通讯联系人，E-mail: xingwh@njut.edu.cn

参考文献：

[1] Boussu K, Van der Bruggen B, Volodin A, et al. Roughness and hydrophobicity studies of nanofiltration membranes using different modes of AFM [J]. Journal of Colloid and Interface Science, 2005, 286: 632–638.
[2] Li Qilin, Xu Zhihua, Ingo Pinnau. Fouling of reverse osmosis membranes by biopolymers in wastewater secondary effluent: Role of membrane surface properties and initial permeate flux [J]. Journal of Membrane Science, 2007, 290: 173–181.
[3] Wyart Y, Georges G, Deumie C, et al. Membrane characterization by microscopic methods: Multiscale structure [J]. Journal of Membrane Science, 2008, 315: 82–92.
[4] 卞晓锴, 陆晓峰, 施柳青. 原子力显微镜及在膜科学技术研究中的应用[J]. 膜科学与技术, 2002, 22: 36– 40.
[5] Park N, Kwon B, Kim In S, et al. Biofouling potential of various NF membranes with respect to bacteria and their soluble microbial products (SMP): Characterizations, flux decline, and transport parameters [J]. Journal of Membrane Science, 2005, 258: 43–54.
[6] Bowen W R, Doneva T A. Atomic force microscopy studies of membranes: effect of surface roughness on double-layer interactions and particle adhesion [J]. Journal of Colloid and Interface Science, 2000, 229: 544–549.
[7] Vrijenhoek E M, Hong S, Elimelech M. Influence of membrane surface properties on initial rate of colloidal fouling of reverse osmosis and nanofiltration membranes[J]. Journal of Membrane Science, 2001, 188: 115–128.
[8] Riedl K, Girard B, Lencki R W. Influence of membrane structure on fouling layer morphology during apple juice clarification [J]. Journal of Membrane Science, 1998, 139: 155-166.
[9] Sular V, Okur A. New application of a surface roughness tester on fabrics [J]. American Association of Textile Chemists and Colorists, 2007, 7: 39-43.
[10] Wyart Y, Georges G, Deumie C, et al. Membrane characterization by microscopic methods: Multiscale structure [J]. Journal of Membrane Science, 2008, 315: 82–92.
[11] Koyuncu I, Brant J, Lüttge A, et al. A comparison of vertical scanning interferometry (VSI) and atomic force microscopy (AFM) for characterizing membrane surface topography [J]. Journal of Membrane Science, 2006, 278: 410–417.
[12] Bogner A, Jouneau P H, Thollet G, et al. A history of scanning electron microscopy developments: Towards "wet-STEM" imaging [J]. MICRON, 2007, 38: 390-401.
[13] Qin Xuanwen. Applications of the High Shearing Mixing Emulsors in the Fining Molecular Sieves [J]. Chemical Engineering and Machinery, 2004, 31: 225-226.
[14] Masahiko H, Hiroki I, Yoshiyasu K. Effect of skin layer surface structures on the flux behavior of RO membranes [J]. Journal of Membrane Science, 1996, 121: 209-215.
[15] Zhang Qi, Fan Yiqun, Xu Nanping. Effect of the surface properties on filtration performance of Al2O3–TiO2 composite membrane [J]. Separation and Purification Technology, 2009, 66: 306-312.
[16] Rizwan T, Bhattacharjee S. Initial Deposition of Colloidal Particles on a Rough Nanofiltration Membrane [J]. The Canadian Journal of Chemical Engineering, 2007, 85: 570-579.

服务与反馈：

【文章下载】【加入收藏】

《膜科学与技术》编辑部地址：北京市朝阳区北三环东路19号蓝星大厦邮政编码：100029 电话：010-64426130/64433466 传真：010-80485372邮箱：mkxyjs@163.com