膜科学与技术

磺化侧苯基杂萘联苯聚芳醚腈酮膜材料的研究

作者：谭相坤，张守海，刘乾，王昭琪，蹇锡高

单位：大连理工大学化工学院，辽宁省高性能树脂工程技术研究中心，辽宁省高分子科学与工程重点实验室，大连市膜材料与膜过程重点实验室，大连 116024

关键词：二氮杂萘酮；聚芳醚腈酮；侧苯基；磺化；质子交换膜

出版年,卷(期):页码： 2021,41(5):17-25

摘要：

以4-（4-羟基苯基）-2,3-二氮杂萘-1-酮、4-（3-苯基-4-羟基苯基）-2,3-二氮杂萘-1-酮、2,6-二氯苯腈、4,4´-二氟二苯酮为原料，通过溶液缩聚反应，合成了侧苯基杂萘联苯聚芳醚腈酮（PPENK-P），并对PPENK-P进行磺化改性，制备含有苯磺酸侧基的杂萘联苯聚芳醚腈酮（SPPENK-P）。采用溶液浇铸法制备了SPPENK-P质子交换膜，并对其吸水率、溶胀率、机械性能、耐氧化稳定性、质子传导性等进行测试。结果表明，SPPENK-P可溶解于二甲基乙酰胺、二甲基亚砜等溶剂，5 ％的热失重温度在330 ℃以上；随着SPPENK-P中DHPZ-P单元比例的增加，SPPENK-P膜的吸水率、溶胀率、质子传导率增加，而耐氧化性降低；SPPENK-P膜在25 ℃下的吸水率均在8 ％以上，95 ℃下的质子传导率可达9.59×10-2 S/cm。

Poly(phthalazinone ether nitrile ketone) containing pendant phenyl group (PPENK-P) were synthesized via high temperature polycondensation from 4-(4-hydroxyphenyl)-2,3-phthalazin-1-one(DHPZ), 4-(3-phenyl-4-hydroxyphenyl)-2,3-phthalazin-1-one (DHPZ-P), 2,6-dichlorobenzonitrile, and 4,4´-difluorobenzophenone. A series of sulfonated poly(phthalazinone ether nitrile ketone) containing pendant phenyl group (SPPENK-P) were prepared from the sulfonation of PPENK-P with concentrated sulfuric acid as sulfonating agent. SPPENK-P membranes were prepared through solution casting method. The membrane performance including water uptake, swelling ratio, mechanical property, oxidative stability, and proton conductivity were investigated. The results show that SPPENK-P can be dissolve in solvents such as dimethylacetamide and dimethyl sulfoxide at 25 ℃, and the 5% thermal weight loss temperature is above 330 ℃. As the proportion of DHPZ-P moiety in SPPENK-P increase, the IEC value, water uptake, swelling ratio, and proton conductivity of the membranes increase, while the oxidation resistance decrease. The water uptake of SPPENK-P membranes at 25 ℃ is above 8 %, and the proton conductivity at 95 ℃ can reach 9.59×10-2 S/cm.

谭相坤（1995-），男，黑龙江省大庆市人，硕士生，主要从事磺化聚芳醚膜材料研究，E-mail：18246951021@163.com

参考文献：

[1] Wang K, Yang L, Wei W, et al. Phosphoric acid-doped poly(ether sulfone benzotriazole) for high temperature proton exchange membrane fuel cell applications[J]. J Membr Sci, 2018, 549:23-27.
[2] Chen J C, Chen P Y, Liu Y C, et al. Polybenzimidazoles Containing Bulky Substituents and Ether Linkages for High-Temperature Proton Exchange Membrane Fuel Cell Applications[J]. J Membr Sci, 2016, 513:270-279.
[3] Yang X, Kim Y J. Overall enhanced properties of high performance semi-crystalline poly(ether ketone)-based multiblock copolymers via thermal treatment for proton exchange membranes[J]. Polymer, 2021, 215:123382.
[4] Shen G, Liu J, Wu H B, et al. Multi-functional anodes boost the transient power and durability of proton exchange membrane fuel cells[J]. Nat Commun, 2020, 11(1):1191.
[5] Krueuer K D. On the development of proton conducting polymer membranes for hydrogen and methanol fuel cells[J]. J Membr Sci, 2001, 185(1):29-39.
[6] Zheng P, Liu Q, Li Z, et al. Effect of crosslinking degree on sulfonated poly(aryl ether nitrile)s as candidates for proton exchange membranes[J]. Polymers,2019,11(6):964.
[7] 孙鹏, 李忠芳, 王传刚, 等. 燃料电池用高温质子交换膜的研究进展[J].材料工程, 2021, 49(01):23-34.
[8] Wei R, Li K, Ma J, et al. Improving dielectric properties of poly arylene ether nitrile with conducting polyaniline[J]. J Mater Sci: Mater Electron, 2016, 27(9):9565-9571.
[9] 张守海, 周娟, 邢东博, 等. 含甲基磺化杂萘联苯聚醚砜酮质子交换膜材料的合成与性能[J]. 高分子学报, 2010(03):274-279.
[10] 陈丽云. 侧链型磺化杂环聚芳醚酮功能膜材料研究[D]. 大连: 大连理工大学, 2017.
[11] Yang Z, Xu F, Gang Z, et al. Preparation and properties of epoxy-based cross-linked sulfonated poly(arylene ether ketone) proton exchange membrane for direct methanol fuel cell applications[J]. Int J Hydrogen Energy, 2010, 35(12):6409-6417.
[12] 唐滋励, 尹航, 杨峻一, 等. 聚芳醚腈功能复合材料研究进展[J]. 化工新型材料, 2020, 48(08):28-32.
[13] Yao B, Yan X, Ding Y, et al. Synthesis of Sulfonic Acid-Containing Polybenzoxazine for Proton Exchange Membrane in Direct Methanol Fuel Cells[J]. Macromolecules, 2014, 47(3):1039-1045.
[14] 蹇锡高, 陈平, 廖功雄, 等. 含二氮杂萘酮结构新型聚芳醚系列高性能聚合物的合成与性能[J]. 高分子学报, 2003, 1(4):469-475.
[15] Wang J Y, Wang M M, Liu C, et al. Synthesis of poly(arylene ether nitrile ketone)s bearing phthalazinone moiety and their properties[J]. Polym Bull, 2013, 70:1467-1481.
[16] Zheng P L, Liu Q Y, Li Z K, et al. Effect of crosslinking degree on sulfonated poly(aryl ether nitrile)s as candidates for proton exchange membranes [J]. Polymers, 2019, 11:964.
[17] 柳周洋, 张守海, 石婉玲, 等. 磺化含侧苯基杂萘联苯聚芳醚砜膜材料的制备与性能[J]. 膜科学与技术, 2019, 39(5): 87-93, 100.
[18] Yu G P, Liu C, Wang J Y, et al. Synthesis, characterization, and crosslinking of soluble cyano-containing poly(arylene ether)s bearing phthalazinone moiety[J]. Polymer, 2010, 51(1):100-109.
[19] Gao Y, Robertson G P, Guiver M D, et al. Sulfonation of poly(phthalazinones) with fuming sulfuric acid mixtures for proton exchange membrane materials[J]. J Membr Sci, 2003, 227(1/2):39-50.
[20] 梅学华, 张守海, 蹇锡高. 磺化杂萘联苯聚醚酮酮质子交换膜材料的合成与性能[J]. 功能材料, 2008, 39(8):1310-1312+1317.
[21] Bai Z W, Durstock M F, Dang T D. Proton conductivity and properties of sulfonated polyarylenethioether sulfones as proton exchange membranes in fuel cells[J]. J Membr Sci, 2006, 281(1-2):508-516.
[22] de Almeida S H, Kawano Y. Thermal Behavior of Nafion Membranes[J]. J Therm Anal Calorim, 1999, 58:569–577.
[23] Ni Z, Li J, Wang X, et al. Preparation and properties of composite membrane of bisphenol A-based sulfonated poly(arylene ether sulfone)and phosphotungstic acid for proton exchange membranes[J]. J Harbin Inst Technol, 2010, 114(1):304-312.
[24] 程言营, 黄清奇, 刘惠平, 廖慧英, 肖繁花. 含萘磺化聚芳醚酮(酮)质子交换膜的制备及性能[J]. 高分子材料科学与工程, 2018, 34(08):1-6.
[25] Lei L, Zhang J, Wang Y. Sulfonated poly(ether ether ketone) membranes for direct methanol fuel cell[J]. J Membr Sci, 2003, 226(1/2):159-167.
[26] Qiao L G, Shi W F. Preparation and Conducting Behavior of Amphibious Organic/Inorganic Hybrid Proton Exchange Membranes Based on Benzyltetrazole[J]. Chem Res Chinese U, 2012(02):345-352.

服务与反馈：

【文章下载】【加入收藏】

《膜科学与技术》编辑部地址：北京市朝阳区北三环东路19号蓝星大厦邮政编码：100029 电话：010-64426130/64433466 传真：010-80485372邮箱：mkxyjs@163.com